You got an injury. And for what? It happens, when you are not concerned about the safety issues while using a circular saw. That’s the reason we are here to let you know about the safety tips.
Whether you have a circular saw, or you’re thinking to aget one, it will be the most important thing to know about the circular saw safety. A circular saw is one of the most necessary tools used for woods, metals, plastics, and other pieces of materials.
While dealing with DIY projects, you may have to face a terrible accident if you’re not aware of the safety tips. Moreover, you need to pick a circular saw which is effective as well as protective!
By the way, we are not here to show you the products, indeed, we show up with the 7 Circular Saw safety tips, which will help you to get rid of unexpected accidents!
7 Circular Safety Tips Step by Step:
It is time to give your hands on this write-up to learn about the 7 circular safety tips. For your convenience, we have provided the step by step guide:
Step-1: Gather Up Safety Equipment before Starting
It is one of the most important tips out there. Before starting the task, it is obligatory to put on safety equipment, especially when you are using the power tool like a circular saw.
A circular saw can throw up woods or chips now and then, which can dash off your eyes and then turn you blind permanently! So, you need to wear safety glasses or goggles. Regular glass is not much protective. For instance, goggles could be the best option for you.
When you are working for a longer time, it is necessary to wear ear protection. Never ever forget to give your hands on the gloves. A pair of gloves won’t give you the protection from the spinning blade, however, it will defend your hands from splinters for sure.
Finally, we recommend you to get a mask for protecting yourself from inhaling sawdust or these types of particles.
Also Read : 10 Best Floor Chairs with Back Support in 2021
Step-2: Check for Obstructions
Before you begin, make sure that the board has no obstructions such as screws and nails. Especially, check it out on the time when you’re cutting woods.
A nail or screw can damage your circular saw as well as might result cause hurt to you. Moreover, it can blunt the blades of the saw that you are using. Considering all the aspects, you should keep the board free from these junks!
Step-3: Check Your Saw
You have to make sure that you have checked the entire saw to know it’s working, or not. Ignore the saw with a defective lower guard, as the retracting lower guard is one of the most important features built into the circular saw. Further on, you need to ensure that it is working freely. And remember, check the saw out while it is unplugged from the socket (safety matters).
Whereas, if you are running a cordless one (battery-powered circular saw), assure to take aside the battery from the saw.
Step-4: Use the Edgy Blades
If you feel that you need to push a lot for cutting any kind of material, then it is a clear sign that you are using the wrong blades, I mean, the dull one.
When you are cutting any pieces of material (like woods), you must have to direct the saw through the cut, not attempting to push the circular saw through the wood.
We do not recommend picking out the dull blades. Always use sharp blades to make your job easier and safer as well.
Step-5: Set the Depth which is Out Of Danger
Whatever you are going to cut woods or metals, it is necessary to set the depth of cutting. After setting it, make sure that the blade is not exposed (under the material) too much.
Then, assure that the lowest tooth is extended not more than 1/8-inch (under the board you’re cutting).
Step-6: Keep the Cords Out Of The Way
While you’re working, keep the cords out of the way. If somehow it enters into the blades, then it will create a big blowup and the result could be an unexpected injury!
Step-7: When you’re Not Working, Unplug It
The safe thing is to unplug the circular saw from the socket when you are done. An unsuspecting person or even you can face a big accident by switching it on! And the result would cause a serious injury (or even death) (source) .
So, let it unplug from the power outlet after completing your season. And for cordless users, we suggest removing the battery while you’re not using it.
And, it is also necessary to unplug the saw when you’re going to swap the blades out.
Actually, you can see a lot more safety tips out there. But, we have listed the most basic circular saw safety tips that you all have to know. We want to see you safe and keep smiling evermore. Say no to injuries!