What is the Best Camera Sliders in 2020 ? read this full article you will get a complete idea.
People always prefer seeing smooth dolly shots in almost everything they watch such as TV shows, movies or any other kinds of videos. Before, to produce such smooth shots of motion, we needed a crew of people and railroad tracts to pull them off. It was difficult, wasn’t it?
Therefore, camera slider was invented. Camera slider is a set of bracketed tracks, consisting of a movable carriage which you can attach directly to your camera or to a tripod head for more panning and angle options. Camera slider is an essential instrument for all professional cameramen who need it to shoot compelling “tracking shots” creating a sense of movement and “reveal shots” exposing more of a sense.
In the present period of innovation, photography assumes an essential part in our day by day lives. Subsequently, I am indicating a list of top 8 best camera sliders in 2020 reviews that guarantee you to taking photographs and recordings proficiently. There is no certification that the nature of the photos and video you catch will be awesome; shaking amid catch can prompt low quality photographs. Luckily, there are a few camera sliders accessible available, which can balance out your camera and guarantee you catch top notch photos and video film.
You may want to read:
- Best Gimbal Stabilizer Reviews 2020
- Camera DSLR Slider Comparison And Review In 2020
- The Best Camera DSLR Slider 2020 On The Market
- Top 10 Best Under 100 $ Stabilizers For Camera DSLR Reviews
If you are doubtful of which camera slider you should buy, you are suggested to consider one of the top 8 best camera sliders in 2020 below.
Table of Contents
- 1. Koolerton Stabilization System
- 2. Shark Slider S1
- 3. Neewer 31.5″/80cm
- 4.Fotodiox Pro SlideCam 600
- 5.StudioFX Pro DSLR Camera Slider Dolly Track Video Stabilizer by Kaezi
- 6.Konova Camera Slider Dolly K2 100cm (39.4inch)
- 7.TARION TR-S120 120cm 47 Track Slider Stabilizer Stabilization System
- 8.Glide Gear Camera Video Stabilizer Tripod Track Dslr Slider-23-inch
1. Koolerton Stabilization System
- Brand : NEQUIO
- Model : HGXC60
- Dimensions : 24.8 x 3.6 x 3.6 inches
- Weight : 1.1 pounds
- Review Rating : 5.0 Out of 5
The flying aluminum compound on the Koolerton Stabilization System makes an unimaginably lightweight slider with a solid aiding of roughness in its track. Its slide plate, then again, experiences cheap orientation.
- Easily mount
- Innovative and smooth
- High end value
- Portable and easy
2. Shark Slider S1
- Brand : HACI
- Model : 45121600
- Dimensions : 31 x 5.5 x 4 inches
- Weight : 12.5 pounds
- Review Rating : 4.7 Out of 5
The Shark Slider S1 reaches out to an entire at its most prominent length, giving you a long, liquid shot with a stabilizer to conflict with any torque from dish and tilts along the keep running of the track. At the point when not completely broadened, the unit fits completely gathered in its cushioned case.
- Smooth and vibration free
- Rigid free
- Extending tubes
- Ideal for high quality photo
- Stable and temperature resistant
3. Neewer 31.5″/80cm
- Brand : Neewer
- Model : Neewer
- Dimensions : 35.83 x 7.87 x 3.15 inches
- Weight : 4.4 pounds
- Review Rating : 3.9 Out of 5
There’s a modest bunch of sliders at generally this length and cost available, yet the Neewer 31.5″/80cm beats them full scale for strength and conveying limit, with enough security in its edge to bolster camera frameworks.
- U shaped ball bearing
- High grade carbon fiber tubes
- Gear shaped joint interface
- Better locking positions
- Easy to carry
4.Fotodiox Pro SlideCam 600
- Brand : Fotodiox
- Model : SldCam1000-39
- Dimensions : 44 x 5 x 5 inches
- Weight : 5.5 pounds
- Review Rating : 3.9 Out of 5
- 2 years Manufacturer Warranty
- Smooth ball slide bearing gadget
- Double Layer Sliding Anodized Aluminum Platform
- Full featured camera slider
It is a 24” Fotodiox camera track slider which features very smooth ball bearing slide system, providing dynamic horizontal, vertical and diagonal movement to your videos. It can be either use to capture dramatic video or slow motion moving with excellent shots. This SlideCam features a double interior rail system which contains four precision bearing to offer smooth movement to any project you have. The bearing tension is also adjustable, allowing you to customize the camera slider to your exact requirements. With the included adjustable legs, you can use this camera slider on any surface. There are also multiple mounting options which allow you to attach this slider to a single tripod, a pair of tripods or light stand for dramatic tilts and angles. This slider is well lubricated, the bearings are well adjusted, and everything is solid. It will just work best for you!
- Solid, fabricated from strong substances and labored to remaining via skilled workers that take delight of their paintings.
- Multi-entrusting. Works with an collection of device, for example, DSLR, JVC or iPhones.
- Adapters are accommodated tripods so that you have all that you have to begin utilizing this slider the minute you get it.
- Grip of feet is questionable
5.StudioFX Pro DSLR Camera Slider Dolly Track Video Stabilizer by Kaezi
- Brand : StudioFX
- Model : 4331911765
- Dimensions : 43.5 x 5.98 x 5.24 inches
- Weight : 2.63 pounds
- Review Rating : 3.9 Out of 5
- Length: 40 inch – The Max stack 15lbs
- Very Smooth Bearing Ball Slide System
- Includes 1/4″ and 3/eight″ Mounting screw
- comes with conveying case
- mobilize any movie digital camera, superior camera, video digital camera or every other bit of device
This 40” slider is made of Aluminum Steel body with round bubble level which assists you in getting slider level. It is probably the quietest one which produces no noisy sound while sliding. Featuring smooth ball bearing slide system, this slider is probably the smoothest one which offers shake-free stability and support to camera while shooting. It is also probably the most versatile camera slider that lets you mobilize any movie camera, video camera, digital camera or other camera devices. It is really smooth, really quiet and really easy to set up with carrying case. Not expensive but professional!
- The Sturdy rails are greater cozy.
- Sliding is very smooth and grating unfastened for flawlessness in either pastime photographs or slight movement.
- Feet are adjustable for your desires, not pre-set on the factory.
- Difficult to place whilst connected to piece screw
6.Konova Camera Slider Dolly K2 100cm (39.4inch)
- Brand : KONOVA
- Model : k2 100
- Dimensions : 39.37 x 1.81 x 0.75 inches
- Weight : 8.53 pounds
- Review Rating : 4.1 Out of 5
- 39.6 lb load capability (6.6 to 26.4 lb finest variety)
- Three steel bearings in triangle arrangement offer smooth, solid, and quiet operation
- Camera carriage with 3/eight”-sixteen screw and 1/4″-20 threaded holes
- Friction-adjustment knob
- Precise anxiety adjustment the use of protected wrench
- Heat-handled carbon steel rail
- 1/4″-20 and 3/8″-sixteen mounting threads at middle and ends for tripods
- Mounting threads on side of tripod for vertical mounting
- Detachable height and attitude-adjustable legs with rubber ball feet
- Metric ruler for repeatable actions
- 1/4″-20 accessory mounting thread at each stop of slider
- Dual oil seals to help keep rails easy from dirt and debris
- Bubble level
- Carrying bag
- Optional crank handle and movement manipulate improve kits
This high quality Korean camera slider is specially designed to provide stable and smooth shots as it is believed that “stable” and “smooth” are the basic elements of the art. Its main body is mad in Samsung factory – a worldwide famous brand name factory. Its dolly, equipped with screw of 3/8” diameter moves on a 10000-mm-long rail, leads the camera ahead of screened theme. Whether you use this camera slider vertically, horizontally, diagonally or sideways, it always remains smooth due to the steel roller bearings riding on a steel track. One of its special features is its versatile uses which includes a crane, a shoulder rig and other ways. If you work in film art, it is a perfect camera slider for you!
- Super transportable
- works well
- can cope with a few weight
- easy motion
- comes with a case.
- Even the smallest grain of dust/sand/hair will motive a few jitter in the rolling mechanism.
- It’s very touchy.
- A flywheel might improve the movement.
- All in all I’m satisfied I bough.
- However, if this ever breaks, I’ll in all likelihood fork out the extra $$ and get a slider with a flywheel.
7.TARION TR-S120 120cm 47 Track Slider Stabilizer Stabilization System
- Brand : TARION
- Model : TARION-SliderDolly-TR-S120
- Dimensions : 51 x 4 x 3 inches
- Weight : 4.7 pounds
- Review Rating : 3.6 Out of 5
- Adopts 4 adjustable low-resistance curler bearings, better load-bearing, more easy and stable.
- Equipped with standard ARCA SWISS groove, ideal for being immediately established on ball head, no brief-launch plate needed.
- Scientific and unique layout on both ends, block the slide plate and prevent it from impact and scratch.
- Upgraded ends design carry a most use of the music length.
- Integrated brake screw layout, greater efficient and may decrease friction.
- A rubber pad part on slide plate, anti-slip and shock resistant.
- Slide plate guide both 1/four” and three/8” interface for versatile utilization.
- Extra 1/four” and 3/eight” interface on both ends, without difficulty fixed on tripods.
- Adjustable toes for best taking pictures top.
It is made of high-quality aluminum alloy, equipped with standard ARCA SWISS groove. It adopts 4 adjustable roller bearings, and it is high load-bearing, smooth and stable. Upgraded ends, with scientific and unique designs, bring you a maximum use of the track length. This nice camera slider also features integrated brake screw which is more efficient and friction-decreasing. This TARION camera slider consists of a rubber pad part one slide plate so that it is anti-slip and shock-resistant. There is also adjustable feet which provide you with your ideal shooting height. This smooth and stable slider can be used on all kinds of professional camcorders, SLR, DSLR camera and so forth. Purchase it, and you will be amazed by its wonderful performance!
- Smooth and quiet operation
- Flexible and easy to use
- Good cost for the money
- Quality substances: average, no longer top class
8.Glide Gear Camera Video Stabilizer Tripod Track Dslr Slider-23-inch
- Brand : Glide Gear
- Model : DEV 1000
- Dimensions : 25 x 2 x 2 inches
- Weight : 2.4 pounds
- Review Rating : 3.9 Out of 5
- 15 lb Load Capacity
- Removable Legs with Adjustable Feet
- Frictionless Polymer Coating
- 1/4″ and three/8″ Mounting Holes
Having limited budget, you would look for a camera slider with a reasonable price. Then this one is highly recommended! This Glidegear camera slider is designed for film makers who always expects to create Feature film quality production shots. It features aircrafted grade, heavy duty, anodized aluminum construction and spirit level and tension adjustment knob with locking feature. With the new technology of greaseless self-lubricating rails and plastic bearings, this camera slider’s carriage does not need too much force to move. It also has versatile usages such as the use with a tripod or on a flat surface. As a good camera slider with high quality, it has received a lot of five-star reviews on Amazon.
- Extendible song
- Easy to setup
- Top pace is just too gradual: no longer speedy enough for some pictures
- Not quite sturdy for heavy camera
- Remote: common
All in all, camera slider is nowadays a necessary tool for cameramen as it can be easily used to take more angles of motion pictures or video and to produce smooth tracking and reveal shots in any video makings. A lot of camera sliders are being sold widely throughout the world, and you may feel difficult in choosing the right one. Therefore, we’ve come up with this list; hopefully, it can help narrow down your alternatives. Purchase any of them, and it will show the best performance that you expected!