When you have your door locked, and there is no other way to unlock it. Then drilling the lock is the last way to access the lock. Every deadbolt locks have tumbler pins that help in locking and unlocking. And drilling the lock will destroy the tumbler pins of the lock.
If you ever need to drill out a lock. Then it is always better to call a locksmith in your area (i.e., slotenmaker Leuven). Or you can also examine and learn how to drill out a lock if you have the right equipment for doing this.
So in this writing, you will get to know how to do it in 07 easy steps. Here’s how!
7 Ways how to drill out a lock:
1. Test the lock:
In order to drill the lock, the first thing you have to do is examine the lock. Different locks have different mechanisms and different ways to build. Some locks have central tumbler pins, which are made out of hard steels. On the other hand, some locks have ball bearing build in the center, which prevents it from getting drilled.
In both cases, it is important to test the lock before drilling it out. If you are not sure whether your drill machine can do it or not, try to consult a local locksmith around your area. They always have the professional kits and tools to help you out. And make sure that you disable all kinds of alarm before attempting the drilling process.
Also Read : How to Change the Digital Door Lock’s Code?
2. Use the right equipment:
The next step is to get and gather the proper equipment before attempting the process, even though you are using a primitive method to get access to your lock. So you do not need that kind of sensitive tools to do it.
But in the whole drill process, you need some minimum equipment to get your job done. Among them, you need a speed power drill that can break the lock mechanism. Otherwise, it would be so hard if you do this by hand.
The next item you need is the different sizes of drill bits. Try to use drill bits that come along with the machine because you have to match the size of drill bits with the lock. It would help if you also had some experiments.
3. Attach drill bits:
In the majority of the cases, it is advised to start with a smaller bit. So you need to get started with a 3mm drill bits in the drill machine. If you do not have that particular bit size, then borrow it from somewhere else. But you need to start with the smaller one so that you can go through the lock mechanism.
4. Try to hammer the center of keyhole:
By hammer, the center of the keyhole will make a point and guidance of drilling. This will help you to point out where you should make the drilling. Again, the hammer point should be in the center. If you can make the proper hole in the center, then it would be effective enough to drill the lock mechanism.
5. Drill a hole through the lock cylinder:
When you make a point with the hammer in the center. After that, you need to drill a hole through the lock cylinder. And thus, it will destroy the tumbler pins of the lock. You have to break at least 4 to 5 pins to break the lock mechanism. Then it will allow you to access the lock.
You will feel more resistance when you cut every pin of the locks with the drilling machine. Then you will feel the decrease of resistance of the lock. This is how you will understand and able to break it. If the drilling machine binds you to drill, then try to reverse and do in the same process.
6. Go slowly:
Try to work regularly. Do not press the machine too hard, and do not work too quickly because this can lead to serious damage. And also, this can jam or break the drilling machine. If you feel like you are facing difficulties to drill through the pins, then you should stop at that time.
Try to put some oil lubricant or water in the drill bits and start the process again. Do not make it at an angle. Try to keep it at a level. If you start drilling in an angle, then it will start drilling the unnecessary parts and will damage more of the lock.
7. Insert a screwdriver in the lock head:
When you are done with the drilling process, check the lock by turning it around if it’s open now or what. If you feel like it is still stuck inside, then insert a screwdriver in the lock head. And put it staring at the drilling point.
If you drilled correctly, then when you insert the screwdriver, it should turn left or right. Again you should get access to the lock. If it is still not working and still hard inside, you should repeat the drilling process to break the lock mechanism.
The bottom line:
In our daily busy life, we have to face lots of difficulties. And losing the keys and not getting access to the lock is one of them. However, to get access, we need to break or drill the lock. If we know how to do it with the right equipment, then it would be much easier for us.
If you do not know, then you need to call up a locksmith around our area. Besides, you will find a lot of locksmith around you, ex. slotenmaker Leuven. So before facing such kind of situation, try to learn and gather some knowledge about it. Also, gather and collect some contact details of them before the time of the emergency