Frames are an important part of doors. It supports the structure of the door. Usually, the jambs and upper transverse member of a frame that supports the sides and top of a doorway is known as door frames. A door relies on its frame to hang and be supported perfectly. So, it is important to install a door frame properly.
Table of Contents
How to Install A Door Frame
Properly storing a door frame is absolutely crucial. Some people may not realize this, but the protection of their home begins with proper construction of the barriers. Therefore, a locksmith must know how to install a door frame perfectly and precisely.
The door jambs and other components of a door frame should be installed carefully. It will ensure that the door hangs level to the floor. If the installation process is no done properly, the door will end up hanging unevenly.
As a result, this may cause several problems for the household. Firstly, the door may not be smooth while opening and closing. Moreover, it could leave unfilled spaces even when closed, which decreases the efficiency of a door.
For these and many other reasons, the door frame must be hung properly. It will help the door continues to function at its peak. If you want to get best quality chassis Charleroi, then you can find there with little effort.
This article provides a simple guideline in installing a door frame properly so that door frames Charleroi can support the doors of your house to their full potential.
Step 01: Checking and Inspecting
The major step in installing the door frame is not the installation process itself. The first and foremost duty of a locksmith is to check the framing for plumb. If everything is checked beforehand, you will know what issues you may run into while installing. Moreover, inspecting ensures that the frame and the floor can be leveled and plumbed perfectly. And whether and where shims are needed. Without proper checkup and investigation, your workhour may double or triple.
Step 02: Using Plumb Lines and Shims
Next up, the sides of the door frame should be plumbed with shims. When you know if due to an unlevel floor, you need to shim up the door frame foundation, you can use a plumb line to help shim the frame sides.
At either side of the arch, hang the plumb line from the top of the frame. Then, use a measuring tape to measure from the framing to the wall to know the sides that are out of plumb.
You can also use the measurement tape to calculate how much adjustment is needed when the door framing is out of plumb.
Step 03: Fitting the Frame
Now, you will have to move the casing into its place for a rough fitting. After placing the shims properly, you will be able to fit the casing into place. Due to pre-inspection and adjustments, this step of the installation will be easier for you.
The box will perfectly slide into its place on top of the shims and will be level. However, further adjustments may be needed with wooden shims to jimmy the door.
Step 04: Mounting the Frame and Attaching the Door
After finishing the previous step, you will now have to mount the casing onto the frame on the wall. You should use nails for casing and shimming the frame to the wall. The open gaps can be filled with wooden shims and by nailing the casing in place. You should use an air compressor or a hammer.
How to Install a Door Frame [Pro Tips]
Before you finish, you should replace the hinge screw with a longer screw that goes through the casing and into the wall framing so that the door does not get sagged over time.
If your screw does not fit into the hinge casing for any reason, you can bury the screw into the wood underneath the hinge casing.
After that, you can install the hinge casing over the top of the other two screws. If you want additional protection, you can perform the same procedure for the other hinges.
Things You Will Need to Complete the Process
You will need the following equipment to complete the process of installing a door frame.
- Spirit level
- Safety mask or any protector for your face
- Measurement tapes
- Safety goggles or eye protector
- Cut-resistant gloves
- Nails and hammer
The process of installing a door frame is complicated, yet very precise and important. Having prior knowledge about it can boost your efficiency in the work process.
The guides to installing a door frame should be your go-to guide for the whole process. Thus, you will be able to fit the perfect door frame for the support of your door.